Recently, we met a customer who was processing bearing steel. He had been using vitrified CBN grinding discs (as shown in the picture below) to grind the workpiece before. But because the workpiece was too small, the vitrified CBN grinding discs he originally purchased had gaps, which would wear into the workpiece to some extent and cause damage to the workpiece. In order to solve this problem, he consulted Moresuperhard our grinding engineers. After thoroughly understanding the customer's processing situation and needs, we recommended a resin CBN grinding disc (255-35-50.8-5 180#) for the customer. After the communication, the customer decided to purchase several resin CBN grinding discs for trial.

We recently had a customer who used our Vitrified CBN Wheels for Air-conditioner Compressor Cylinder in their manufacturing process.

Metal diamond grinding wheels are commonly used for grinding glass bottles in industrial applications. They consist of a metal bond matrix with diamond particles embedded within the matrix. The metal bond provides excellent durability and resistance to wear from the abrasive glass surface while the diamond particles allow for a precise and efficient grinding process.

Dressing a grinding wheel means reshaping its surface to restore its cutting performance or to change its surface characteristics.

Diamond grinding wheels are a crucial component in various grinding processes, such as precision grinding, hard grinding, and finishing grinding. They are typically used for grinding hard and brittle materials, such as glass, ceramics, and metals. However, achieving the best grinding performance of diamond grinding wheels can be challenging, especially if the wrong parameters are chosen or if the grinding process is not optimized. In this article, Moresuperhard will explore the key factors that affect grinding performance and provide some tips on how to maximize the efficiency and effectiveness of diamond grinding wheels.

Do you know what peeling grinding is?
Peeling grinding usually uses a CBN grinding wheel with a width of about 4-6mm, and a 10-15° chamfering area is set on